超声波清洗机使用过程中的常见故障有哪些？

Any equipment will have some common failures in the process of use, so does the ultrasonic cleaner. Operators should know about these common failures and know how to repair them.

1、换能器损坏

1. Damaged transducer

一般来说，超声波清洗机在长时间处于正常开机或者是使用的状态下，清洗机体内的温度必然上升，换能器部位的胶体部分会被熔化、脱落或者断裂。作为操作者，应该进行定期检查，及时更换损坏的换能器。

Generally speaking, when the ultrasonic cleaner is normally started or used for a long time, the temperature inside the cleaner will inevitably rise, and the colloid part of the transducer will be melted, fallen off or broken. As an operator, you should conduct regular inspection and replace damaged transducers in time.

2、保险损坏

2. Insurance damage

打开超声波清洗机的电源之后，如果设备没有任何反应，这种情况下，很可能是电源内的插座保险出现了损坏，要及时检查维修。

After turning on the power supply of the ultrasonic cleaner, if the equipment does not respond, it is likely that the socket fuse in the power supply is damaged, and it should be checked and repaired in time.

3、功能管损坏

3. The function tube is damaged

长时间不停机的处于工作状态，或者说清洗机放入的清洗剂太少，这些都会导致功能管损坏。

If the machine is in working condition without stopping for a long time, or the detergent put in by the cleaner is too little, the function pipe will be damaged.

以上就是小编与大家分享的超声波清洗机的常见故障，一旦出现这些故障，操作人员一定要要进行及时处理。

The above are the common failures of the ultrasonic cleaning machine that Xiaobian shared with you. Once these failures occur, the operators must deal with them in a timely manner.

以上就是为大家介绍的有关超声波清洗设备的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以专业的态度,为您提供服务

The above is a detailed introduction to the ultrasonic cleaning equipment, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services