超声波自动清洗机在液体的使用规则！

研究证明，超声波作用于液体时，液体中每个气泡的破裂都会产生能量巨大的冲击波，相当于瞬间几的高温，高达几千个大气压，这种现象被称为“空化”，超声波自动清洗机是利用液体中气泡破裂产生的冲击波来清洗工件的内外表面，超声波在液体中传播，使液体和清洗槽以超声波频率一起振动，当液体和清洗槽振动时，它们有自己的固有频率，也就是声波的频率，所以人们听到嗡嗡声。
Research has proved that when ultrasound acts on the liquid, the rupture of each bubble in the liquid will produce a shock wave with huge energy, which is equivalent to a few hundred degrees of high temperature in an instant and up to thousands of atmospheric pressure. This phenomenon is called "cavitation". The ultrasonic automatic cleaning machine uses the shock wave generated by the bubble rupture in the liquid to clean the internal and external surfaces of the workpiece, and the ultrasonic wave propagates in the liquid, making the liquid and the cleaning tank vibrate with ultrasonic frequency, When the liquid and cleaning tank vibrate, they have their own natural frequency, that is, the frequency of sound waves, so people can hear buzzing.
超声波自动清洗机的原理主要是通过换能器将功率超声频率源的声能转化为机械振动，通过清洗罐壁向罐内的清洗液辐射超声波，主要由超声波清洗槽和超声波发生器组成，超声波自动清洗机的清洁方式：区分全封闭式和半封闭式，触摸屏操作全过程由电脑控制，大大降低劳动强度。
The principle of the ultrasonic automatic cleaning machine is to convert the sound energy of the power ultrasonic frequency source into mechanical vibration through the transducer, and radiate the ultrasonic wave through the cleaning tank wall to the cleaning fluid in the tank, which is mainly composed of the ultrasonic cleaning tank and the ultrasonic generator. The cleaning method of the ultrasonic automatic cleaning machine is to distinguish the fully closed type and the semi-closed type. The whole process of the touch screen operation is controlled by the computer, which greatly reduces the labor intensity.
超声波自动清洗机的维护可以保持和恢复设备的技术特性，保持设备具有良好的可用性和可靠性，为了使超声波自动清洗机，正常高效的工作，必要的维护可以延长设备的使用寿命，一般维护周期为15天。
The maintenance of the ultrasonic automatic cleaning machine can maintain and restore the technical characteristics of the equipment and maintain the equipment with good availability and reliability. In order to make the ultrasonic automatic cleaning machine work normally and efficiently, the necessary maintenance can extend the service life of the equipment. The general maintenance cycle is 15 days.

超声波自动清洗机的日常维护：
Routine maintenance of ultrasonic automatic cleaning machine:
1.保持设备工作场所通风、干燥、清洁，有利于设备的长期高效运行和工作环境条件的优化;
1. Keep the equipment workplace ventilated, dry and clean, which is conducive to the long-term and efficient operation of the equipment and the optimization of working environment conditions;
2.当清洗液太脏时，要及时处理，定期清洗清洗槽和储液槽内的污垢，保持清洗槽及其外观的清洁，提高清洗槽的耐久性;
2. When the cleaning fluid is too dirty, it should be treated in time. Clean the dirt in the cleaning tank and the storage tank regularly, keep the cleaning tank and its appearance clean, and improve the durability of the cleaning tank;
3.保持电气控制箱和设备通风口远离水蒸气、腐蚀性气体和灰尘，并定期用压缩空气清理附着的灰尘;
3. Keep the electrical control box and equipment vent away from water vapor, corrosive gas and dust, and regularly clean the attached dust with compressed air;
4.定期测试设备的绝缘性能，定期检查老化的电器元件，检查接地线，确保设备接地良好，该项目应由具有专业经验的电工实施;
4. Regularly test the insulation performance of the equipment, regularly check the aging electrical components, and check the grounding wire to ensure that the equipment is well grounded. This project should be implemented by electricians with professional experience;
5.定期测试电源，确认符合设备的供电电压要求，避免在过高或过低的不稳定电源下长时间运行;
5. Regularly test the power supply to confirm that it meets the power supply voltage requirements of the equipment, and avoid long-time operation under too high or too low unstable power supply;
6.对于有过滤装置的设备，定期更换滤芯;
6. For equipment with filtering device, replace the filter element regularly;
7.带传动机构，按要求定期添加黄油、润滑油等润滑油，定期更换减速机齿轮油，保证运动部件在良好的润滑条件下工作;
7. With the transmission mechanism, add grease, lubricating oil and other lubricating oil regularly as required, and replace the gear oil of the reducer regularly to ensure that the moving parts work under good lubricating conditions;
8.如果发现清洗箱和管道内有沉淀物，应及时清洗;定期更换清洗液，建议15到20天。在排放清洗液之前，确保设备已经停止。
8. If sediment is found in the cleaning tank and pipeline, it shall be cleaned in time; Replace the cleaning fluid regularly, 15 to 20 days is recommended. Before draining the cleaning fluid, make sure that the equipment has stopped.
本文由全自动超声波清洗机友情奉献.更多有关的知识请点击:  真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待
This article is dedicated by the automatic ultrasonic cleaning machine. For more information, please click: Sincere attitude. We will provide you with comprehensive services. We will continue to offer you more relevant knowledge. Please look forward to it