大型卧式臭氧发生器

产品简介：Ozonator product introduction

臭氧发生室及臭氧发生单元选用316L材质，整体材质不低于304不锈钢，密封及绝缘部分采用聚四氟乙烯及氟橡胶材质。发生室卧式结构，放电体水平放置，检修方便。双放单体串联，有利于提高臭氧浓度降低功耗，变频电源风冷设计安全可靠。标配西门子PLC，可配置包含温度、压力、流量、浓度检测、控制阀门在内的各种自控仪表阀门，在满足客户需求情况下，降低能源消耗。

The ozone chamber and ozone generating unit are made of 316L material, the overall material is not less than 304 stainless steel, the sealing and insulation parts are made of PTFE and fluorine rubber.Horizontal structure of generator chamber, horizontal placement of discharge body, convenient maintenance.The series of double amplifier monomers is beneficial to increase ozone concentration and reduce power consumption, and the design of frequency conversion power supply air cooling is safe and reliable.Standard Siemens PLC, can be configured including temperature, pressure, flow, concentration detection, control valve, including a variety of automatic control instrument valves, in order to meet customer needs, minimize energy consumption.

1）功耗基于不同的冷却水温度及浓度要求，不包括压缩机、水泵等设备。

2）氧气源浓度超过12wt%接受定做，Z高浓度18wt%（273.6mg/L），空气源臭氧浓度超过3wt%接受定做，Z高浓度4wt%（52.6mg/L）

3）设备外形及安装尺寸请联系我公司索取详细规格书。

1）Power consumption is based on different cooling water temperature and concentration requirements, not including compressors, pumps and other equipment.

2）The concentration of oxygen is over 12wt%, and the highest concentration is 18wt% (273.6mg/L). The ozone concentration of air is over 3wt%, and the highest concentration is 4wt% (52.6mg/L).

3）Equipment shape and installation size please contact our company for detailed specifications.