产品详情
冷热冲击试验箱特点
·此设备分为高低温区、低温区、测试区三部分,测试样品*静止。采用*之蓄热、蓄冷结构,强制冷热风路切换方式导入测试区,完成冷热温度冲击测试。
·可独立设定高温、低温及冷热冲击三种不同条件之功能,执行冷热冲击条件时,可选择2槽或3槽之功能并具有高低温试验机的功能。
冷热冲击试验箱执行与满足标准
·.GB/T2423.1-1989低温试验方法Test method of low tempemture test
·GB/T2423.2-1989高温试验方法Test method of high temperature test
·GB/T2423.22-1989温度变化试验Test of temperature chantge
·GJB150.5-86温度冲击试验Test of temperature shock
·GJB360.7-87温度冲击试验Test of temperature shock
·GJB367.2-87温度冲击试验Test of temperature shock
冷热冲击试验箱标准型号及技术参数(可由客户要求非标定做)
型号Model | EET-50 | EET-80 | EET-100 | EET-150 | EET-250 | ||||||||||
内箱尺寸 Interior dimaensions (W×H×D)cm | 36×35×40 | 50×40×40 | 60×40×40 | 60×50×50 | 70×60×60 | ||||||||||
外箱尺寸 dimensions (W×H×D)cm | 156×175×144 | 170×180×144 | 180×180×144 | 180×190×154 | 190×200×164 | ||||||||||
预热温度范围 Preheat Temp.range | ±60℃~±200℃ | ||||||||||||||
预冷温度范围 Precool Temp.range | --10℃~--70℃ | ||||||||||||||
测试温度范围 Samples Temp range | --10℃~--40℃;--10℃~--55℃;--10℃~--65℃; | ||||||||||||||
性能/Performne | 温度稳定度 Tmp.constancy | ±2℃ | |||||||||||||
归复时间 Recovery time | 3-5min | ||||||||||||||
升温时间 Heat up time | ℃ | 150 | 150 | 150 | 150 | 150 | |||||||||
min | 30 | 40 | 40 | 40 | 40 | ||||||||||
降温时间 Pull down time | ℃ | -55 -65 -75 | -55 -65 -75 | -55 -65 - 75 | -55 -65 -75 | -55 -65 -75 | |||||||||
min | 70 80 90 | 70 80 90 | 80 90 100 | 90 100 110 | 100 110 120 | ||||||||||
材料Material | 内箱材质 Interior material | 不锈钢一级镜面钢板 Stainless steel plate (SUS304) | |||||||||||||
外箱材质 Exterior material | 不锈钢雾面线条处理 Stainless steel plate (SUS304) | ||||||||||||||
保温材质 Insualation | 硬质发泡及玻璃棉Rigid polyauethane foam and glass wool | ||||||||||||||
系统/System | 风机Blower | 高温箱、低温箱、试验箱分别用不同功率及转速的离心风机 | |||||||||||||
加热器Heater | 镍铬合金电加热器,Incoloy sheath heater | ||||||||||||||
冷冻系统 Refrigeration system | 复迭式制冷,压缩机(采用法国泰康全密闭式压缩机或德国比泽尔/谷轮半密闭式压缩机 | ||||||||||||||
控制器Controller | 韩制、日制彩色触摸屏Japan TFT LCD touch screen computer com trocler | ||||||||||||||
配件 Accessories | 上下可调隔架两个;引线孔φ50mm 1个(选配);记录仪1个(选配) Two interlayer frames;lead hole: φ50mm:1(optional);recorder:1(optional) | ||||||||||||||
保护装置 Safety device | 无熔丝开关,保险丝,压缩机超压、过热、过电流保护、超温保护、水流量保护,相序保护、油压保护、泄压保护、低压保护 No-fuse breaker,fuse,compressor overpressure,overheating,overcurrent protection,overtemperature protection,water flow protection,phase sequence protection,oil pressure protection,pressure relief protection,low voltage protection. | ||||||||||||||
电源功率Power(kw) | 3φ5w AC380V ±10% 50/60Hz | ||||||||||||||
20 21 22 | 21 22 23 | 22 23 25 | 28 35 45 | 30 40 50 |
联系我时,请说明是在环保在线上看到的,谢谢
*您想获取产品的资料:
个人信息: