DL系列不锈钢板框过滤机

DL series stainless steel frame filter

本机为不锈钢多层板框式过滤机，适用于浓度50%以下粘度较低，含渣量较少的液体作密闭过滤以达到提纯，灭菌、澄清等精滤、半精滤的要求，直接选用微孔滤膜，可不经微孔薄膜过滤器过滤可达到无菌过滤之目的。

本机过滤面积大，流量大，适用范围大，所以在制药、化工、食品等行业有广泛用途，应用在制药厂针剂药液之过滤，效能甚佳。

The machine is stainless steel multilayer frame filter.it is fit for enclosed filter in liquids with concentration ≤ 50%,low viscosity and little slag so as to meet precision filter and half-precision filter requirements like refining,sterilization and clarification.By directly using microporous membrane,material can achieve aseptic filtration without passing microporous membrane filter.

  The filter has big filter area ,byg flow,and wide application scope,So it is widely used in pharmacy,chemical engineer-ing and food industries.While used for filtering injection liquids in pharmaceutical factories,it has particularly good effects.

特点：

本机除配用电机外，其它机件均采用不锈钢SUS304或SUS316L制造，适用于过滤各种PH值酸碱溶液，本机应用加压密闭过滤，滤液损耗少，过滤质量好，效率高。过滤部分由十层滤板组成，过滤面积大，流通量大；且可根据被滤溶液之不同生产工艺（初滤、半精滤、精滤）要求，更换不同滤膜及根据用户生产流量之大小可适当减少或增加滤板层数，使之适合生产之需要，因此本机具有一机多用适用范围广泛特点；滤板采用平面螺纹网状形，结构*，不变形，容易清洗，能有效地增强滤膜的使用寿命，从而降低和节约生产成本，本机配备之不锈钢*，其配用电机小，耗电省。机座下装有胶轮，操作方便，移动灵活，可供移动使用。

Features

   All parts of the machine,except collocatde dynamo,are made of stainless steel SUS304orSUS316L,which is fit for filtering solution of different PH value.The machine adopts sealed pressure-filter,wheic results in low filter liquid waste,good filter quality and high filter efficienty,Filtening part consists of ten layers of filter plates whech has large filter area and flow.Users can change filte membranes according to different technological requirement (initial filter,precision filter,half-precision filter)of the filtered solution,and properly reduce or increase filter plate quantity according to users’production flow.Hence,the machine is multi-functional and has wide application scope.Filter plates adopt flat screw-thread reticulation,which is advanced,easy to clean ,not easy to deform,thus effectively extends performance life of different filter membranes and reduces or save production cost.Thestainless steel loquid in fusion pump equippde on the machine has small dynamo and low power waste.Rubber wheels are fixed under the engine base for mobil use ,whhich is flexible and convenient.

技术参数：